Juniper JN0-660 originale fragen

Wir versprechen, dass Sie die Prüfung zum ersten Mal mit unseren Schulungsunterlagen zur Juniper JN0-660 Zertifizierungsprüfung bestehen können. Sonst erstatten wir Ihen die gesammte Summe zurück und Ihnen ein gleichwertiges kostenloses Produkt schenken.

Wenn Sie finden, dass eine große Herausforderung in Ihrem Berufsleben vor Ihnen steht, so müssen Sie die Juniper JN0-660 Zertifizierungsprüfung bestehen. Pass4Test ist eine echte Website, die umfassende Kenntnisse über Juniper JN0-660 Zertifizierungsprüfung besitzen. Wir bieten exklusive Online-Juniper JN0-660 Prüfungsfragen und Antworten. So ist es ganz leicht, die Prüfung zu bestehen. Unser Pass4Test bietet Ihnen 100%-Pass-Garantie. Pass4Test ist als Anführer der professionalen Zertifizierung anerkannt. Sie bietet die umfangreichste standardisierte Trainingsmethoden. Sie werden feststellen, dass die Juniper JN0-660 Prüfungsfragen und Antworten zur Zeit die gründlichste, genaueste und neueste Praxis sind. Wenn Sie die Juniper JN0-660 Prüfungsfragen und Antworten haben, werden Sie sicher mehr sicher sein, die Prüfung zum ersten Mal zu bestehen.

Bemühen Sie sich noch um die Juniper JN0-660 Zertifizierungsprüfung?Wollen Sie schneller Ihren Traum erreichen?Bitte wählen Sie die Schulungsmaterialien von Pass4Test. Wenn Sie Pass4Test wählen, ist es kein Traum mehr, die Juniper JN0-660 Zertifizierungsprüfung zu bestehen.

Heutzutage, wo IT-Branche schnell entwickelt ist, müssen wir die IT-Fachleuten mit anderen Augen sehen. Sie haben uns viele unglaubliche Bequemlichkeiten nach ihrer spitzen Technik geboten und dem Staat sowie Unternehmen eine Menge Menschenkräfte sowie Ressourcen erspart. Sie beziehen sicher ein hohes Gehalt. Wollen Sie wie sie werden?Oder beneiden Sie sie?

Exam Code: JN0-660
Prüfungsname: Service Provider Routing and Switching, Professional (JNCIP-SP)
Aktulisiert: 2014-03-26
Nummer: 247 Q&As

Es ist uns allen klar, dass das Hauptproblem in der IT-Branche ein Mangel an Qualität und Funktionalität ist. Pass4Test Juniper JN0-660 Fragen und Antworten stehen Ihnen alle notwendigen Schulungsunterlagen zur Verfügung. Ähnlich wie die reale Zertifizietungsprüfung verhelfen die Multiple-Choice-Fragen Ihnen zum Bestehen der Prüfung. Die Juniper JN0-660-Prüfung Schulungsunterlagen von Pass4Test sind überprüfte Prüfungsmaterialien. Alle diesen Fragen und Antworten zeigen unsere praktische Erfahrungen und Spezialisierung.

JN0-660 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-660.html

NO.1 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B

Juniper antworten   JN0-660 zertifizierung   JN0-660   JN0-660   JN0-660 prüfungsunterlagen

NO.2 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A

Juniper   JN0-660 prüfungsfrage   JN0-660 echte fragen   JN0-660

NO.3 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D

Juniper prüfungsfragen   JN0-660 exam fragen   JN0-660 zertifizierungsantworten

NO.4 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A

Juniper prüfungsfrage   JN0-660   JN0-660 zertifizierungsfragen   JN0-660 prüfung   JN0-660

NO.5 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C

Juniper   JN0-660 originale fragen   JN0-660 zertifizierung   JN0-660 prüfungsunterlagen   JN0-660

NO.6 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D

Juniper prüfungsfragen   JN0-660   JN0-660 prüfungsunterlagen   JN0-660 prüfung

NO.7 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D

Juniper   JN0-660 originale fragen   JN0-660 zertifizierungsfragen   JN0-660   JN0-660   JN0-660 prüfungsfragen

NO.8 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C

Juniper prüfungsfrage   JN0-660   JN0-660 dumps   JN0-660 zertifizierung

NO.9 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B

Juniper   JN0-660   JN0-660

NO.10 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B

Juniper echte fragen   JN0-660 echte fragen   JN0-660 prüfungsfragen   JN0-660 dumps   JN0-660 zertifizierungsantworten   JN0-660 dumps

NO.11 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C

Juniper testantworten   JN0-660 zertifizierung   JN0-660   JN0-660

NO.12 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C

Juniper   JN0-660   JN0-660   JN0-660 prüfungsunterlagen

NO.13 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C

Juniper   JN0-660 originale fragen   JN0-660 testantworten   JN0-660

NO.14 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D

Juniper   JN0-660   JN0-660 exam fragen   JN0-660   JN0-660 dumps

NO.15 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D

Juniper   JN0-660 prüfung   JN0-660   JN0-660

NO.16 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B

Juniper   JN0-660   JN0-660 antworten   JN0-660

NO.17 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper prüfungsfragen   JN0-660 dumps   JN0-660

NO.18 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C

Juniper prüfungsfrage   JN0-660   JN0-660   JN0-660 dumps

NO.19 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D

Juniper originale fragen   JN0-660   JN0-660 prüfung   JN0-660 exam fragen

NO.20 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C

Juniper zertifizierungsantworten   JN0-660 zertifizierungsfragen   JN0-660   JN0-660   JN0-660

Pass4Test bietet Ihnen die neusten HP2-K36 exam Unterlagen und MB6-872 pdf Fragen & Antworten mit hoher Qualität. Unser 000-196 zertifizierung und C-HANATEC131 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative NS0-145 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/JN0-660.html